Installing The Memory Card - Allen-Bradley 2711-NM12 Installation Instructions Manual

2 256K, 1M, 2M, 4M and 10M PCMCIA Memory Cards

Installing the Memory Card

To install the memory card in the PanelView terminal:
1. Locate the card slot on the back of the PanelView terminal. The location of
the card slot depends upon the terminal type.
PanelView 550
2. PanelView terminals use both vertical and horizontal card slots.
• For vertical card slots, position the card so that the key slot is facing the right
side of the terminal.
• For horizontal card slots, the key slot should be on top, left side.
Connector Sockets
Key Slot
Horizontal Card Slot
3. Insert the card into the card slot and push until the card is firmly seated.
!
40061-185-01(E)
PCMCIA Card Slot
ATTENTION: Do not force the card into slot. Forcing the card into
the slot may damage the connector pins.
PanelView 1400e
Vertical Card Slot
Key Slot
Connector Sockets