Table of Contents
Advertisement
Highlight Alarms and press the Select soft key or the
1.
key. The following options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified
time. This option allows you to set the Snooze option and the days
of the week to be enabled.
• Alarm 1: primary alarm setting. This option allows you to set the
days of the week for the alarm to sound.
• Alarm 2: secondary alarm setting. This option allows you to set
the days of the week for the alarm to sound.
• Auto Power-u p : when this option is enabled, the wake-up alarm
will sound even when the phone is powered off.
2.
Select an alarm type and press the Select soft key or the
key. Set the following options:
• Alarm: use the Left or Right Navigation key to turn the Alarm On
or Off.
Note: Your phone is preset to a 12-hour format. To change the time format,
see "Set Time & Date" on page 47.
• Alarm Time: use the alphanumeric keypad to enter a time for the
alarm to ring.
• AM/PM: use the Left or Right Navigation key to select AM or PM.
• Alarm Day: press the
set the days of the week you wish your alarm to sound, use the Up
61
key to access the Alarm Day screen. To
or Down Navigation keys to select the day and press the
mark the day. Press the OK soft key to save the changes.
• Alarm Tone: press the
To set the Alarm Tone, use the Navigation key to select the tone.
Press the Select soft key or the
• Snooze: use this option to turn on and set the snooze interval.
Choose from Off, 1 Min, 3 Min, 5 Min, 7 Min, or 10 Min.
• Repeat: use this option to limit the number of times the alarm
repeats. Choose from 1, 2, 3, 5, or 10.
Press the Save soft key to save changes.
3.
Tip: To stop the alarm when it rings, open the phone and press any key.
Note: Press the OK soft key to turn off the alarm. Press the Snooze soft key
to silence the phone for 1, 3, 5, 7, or 10 minutes.
Setting Auto Power-up Alarms
You can set the phone to ring the alarm when the time for an
alarm comes, if the phone is switched off.
Highlight Alarms and press the Select soft key or the
1.
key. Highlight Auto Power-up and press the Select soft
key.
to
key to access the Alarm Tone screen.
key to make your selection.
Advertisement
Table of Contents
