General Functions; Making A Call - Samsung SGH-2488 Owner's Manual

Dual gsm telephone
Hide thumbs Also See for SGH-2488:
Table of Contents

Advertisement

2488E-04-GeneralFunctions

General Functions

Making a Call

When the idle screen is displayed, key in the area
code and phone number and press
N o t e: If you have set the Auto Redial option (6 - 7) to O N
(see page 102) and the person called does not
answer or is already on the phone, the number is
redialled automatically up to ten times.
International Calls
1. Press and hold down the 0 key.
The + character appears.
2. Key in the country code, area code and phone
number and press
Correcting the Number
To clear...
The last digit
displayed
Any other digit
in the number
The whole display
Ending a Call
When you have finished your call, briefly press the
k e y.
26
6/7/00
9:00 PM
Page 26
.
.
Then...
Press the C key.
Press the
soft key until the
cursor ( ) is immediately to the
right of the digit to be cleared.
Press the C key.
Hold down the C key for more
than one second.
Making a Call from the Phonebook
You can store the names and phone numbers called
regularly in the SIM card and phone memory, called
the phonebook. You then simply select the required
name to recall the associated number. For further
details on the Phonebook feature, refer to page 36.
Quick Dialing with the SIM location number
Memory location 1 through 9 : Press and hold the
associated digit key for the SIM location.
Other location : Enter the location number in the SIM
card, then press # key, then the phone number will
be displayed, then press the left soft key.
Voice Dialling
If you have set the Active Flip option (6-0) to Voice
Dial(see page 103), your phone also allows you to
say a name when you open the flip cover. It then
automatically dials the number stored with the name.
For further details on the Voice Dialling feature, refer
to page 88.
Last Number Redial
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
1. If there are any characters on the display, clear
the display by holding down the C key for more
than one second.
General Functions
27

Advertisement

Table of Contents
loading

Table of Contents