LG LBK1000W Installation Manual

Installation with LW9424/9422 and LNP2810T
models
a
Install the Wall Mount Bracket to the wall.
b
Install the PIPE Installation Bracket as
shown below.
c
Connect the safety cable to the camera
body in order to prevent a camera from
falling.
d
Connect the cable to the camera jack.
e
Assemble the camera to the PIPE Installation
Bracket by turning it clockwise. Tighten the M3
SAMS Screws and then align the cover adaptor
and main body.
Installation Guide
Wall Mount Bracket
Model: LBK1000W
Accessories
- Installation manual
- Screw accessory
y Wrench(M5) (1 ea)
y Wrench(M10) (1 ea)
y Hexagon head bolt (M10 x L50.0 mm)
(4 ea)
Getting Started
Introduction
This product is designed for the wall mount of LG
Dome camera on the wall.
The installable LG Dome Camera
- LT713, LT913, LT723, LT923, LW9226, LW9228,
LCP2850, LCP3750(T), LNP3700T, LNP2800, LW9424,
LW9422 and LNP2810T models
- Refer to the owner's manual of LG Dome Camera for
the compatibility of this product.
- Actual set may be differ from the picture described
in this manual.
WARNING:
This product contains chemicals known to the State
of California to cause cancer and birth defects or
reproductive harm. Wash hands after handling.
Installation Precautions
Make sure that the installation place can endure at least
4 times of the total weight of the Wall Mount Bracket
and Camera.
Specifications
y Net Weight: 1.1 kg
y Material: Aluminum
y Operating Temperature: -50 °C to 60 °C
y Operating Humidity: 0 to 100 %
y Dimensions:
125 mm
300 mm
227 mm