Table of Contents
Advertisement
Messages
Delivery report: allows you to set on or off. When
this function is set to on, the network informs you
whether or not your message has been delivered.
Character support: allows you to select the
character set when editing and sending messages.
GSM-alphabet: you can only send the message
using GSM characters.
Uni-code: you can send the message using Unicode
characters, including GSM alphabets. And the
maximum number of characters which can be
entered in a message is reduced to half in length.
Automatic: if you select Automatic, the phone
selects the character set according as you use
Unicode characters or not.
Multimedia messages
Using this menu, you can set up default settings for
sending or receiving MMS message. The following
options are available:
Send settings: The following options are available:
Priority: allows you to set the priority of message.
Validity period: allows you to set the length of time
your messages are stored at the message centre
while attempts are made to deliver them.
Delivery after: you can set the delay time before
the phone sends your messages.
Address hiding: when this option sets to On, your
phone number does not display on the recipients
phone.
110
Delivery report: when this option sets to On, the
network informs you whether or not your message
has been delivered.
Read reply: when this option sets to On, your
recipient's phone sends a reply to let you know
when your message was read by her/him.
Receive settings: the following options are
available:
Msg. reception: allows you to set how you receive a
message. You can select one of Manual,
Automatic and Reject.
Anonymous reject: when this option sets to On,
your phone rejects messages without a caller ID.
Adverts reject: when this option sets to On, you
can reject advertisements by service provider.
Report allowed: when this option sets to Off, your
phone does not send a reply to the recipient's
phone even if the sender asks for the read reply.
MMS profiles: in this menu, you can configure
MMS profile settings that are required when you
send or receive multimedia messages.
Current profile: allows you to select one profile to
use currently.
Profile setting: allows you to set up to five profiles.
• Profile name: enter the name of the profile.
• Server URL: enter the address of profile server.
• GSM setting: allows you to change the proxy
settings for the GSM network.
- Gateway: enter the IP address and IP port.
Messages
111
Advertisement
Table of Contents
