JG 698W1 Assembly Instructions

Thank you for purchasing this quality product.
Be sure to check all packing material carefully for
small parts which may have come loose inside
the carton during shipment.
Count all parts and hardware, compare with the parts
list below to be sure all parts are present.
PARTS
ITEM DESCRIPTION
1 Table Top with Apron
2 Table Leg
HARDWARE
ITEM DESCRIPTION
5/16"x2½"
A Hex Bolt
B Spring Washer
C 5/16" Flat Washer
D Wrench
1. Place Table Top (1) face down on a clean and flat, soft surface to prevent it
from being scratched.
2. Place a Table Leg (2) in corner of table and insert Bolt (A) with Washers (C & B)
through the holes in corner block of apron frame into the leg and tighten with wrench
provided. Repeat for the other legs.
698W1 Shaker Table
Whittier Wood Products customer service directly by calling
QTY
1
4
QTY
8
2
8
8
1
2
C
B
A
ASSEMBLY INSTRUCTIONS
For information or replacement parts, please contact
toll free at 800-653-3336
or writing to P.O. Box 2827 • Eugene, Oregon - USA 97402
We will replace any parts which are defective, missing,
or damaged during assembly.
Business hours: Mon.-Fri. 7:00 to 5:00 Pacific time.
A message can be left 24 hours, 7 days a week.
1
2
1
D
(40x70)
2
2
Rev. 2/05