Before You Begin - Phyn Plus Installer's Manual

Before you begin

• Turn water o and drain pipes before installation.
• Phyn Plus must be installed in accordance with all local codes
and requirements.
• Installation of Phyn Plus is not recommended on main water
distribution pipes larger than 1-1/4 inches without a thorough review
of plumbing demand and hydraulic performance.
Choosing where to install Phyn Plus
Phyn Plus can be installed indoors or outdoors, horizontally or
vertically. The device cannot be installed in a location where it can be
submerged.
Install Phyn Plus on the main water distribution pipe immediately
after the main shuto valve and before connections or branches to
any plumbing fi xture(s) or other devices. Phyn monitors pipes that are
located "after" or downstream of the unit. Fixtures or pipes, including
irrigation or water softeners, that are located "before" or upstream of
the unit will not be able to be monitored.
Phyn Plus must be located within 15 feet of a 120V electrical outlet.
We recommend using only an outlet equipped with a ground fault
circuit interrupter (GFCI).