Error Message
Display
If you face an error during the calculation, refer to the
following:
Messages
Causes & Solutions
No Value
• When only operators (-, +, x, ÷) are
• There may be no number in between
• There is no number next to a function
Invalid(-) Value When '-' is required in the calculation,
this message is displayed.
No Operator
Enter a desired operator.
Opening Brace • Brackets may not be placed in the
• A bracket may be required.
Cannot
When you divide a number by 0, this
Calculate
message appears.
Out Of Limit
A result value is not in between
-1E199 and 1E199.
Cannot Convert When you change a type, it is out of type
limit.
entered successively without entering
any number, this message is
displayed. Enter numbers.
the brackets.
(sin, cos, tan, asin, acos, atan, sqrt,
3sqrt, log, in, 10x, ex, abs). Enter
numbers.
right location. Replace the brackets.
189