Setting Up Your Phone (Basic) - Samsung SCH-i225 Series User Manual

Note: As with any other radio-transmitting device, do not touch the antenna
(at the bottom of the device) while using your phone as this can affect
call quality and can cause the phone to operate at a higher power level
than is necessary.
If the phone functions are disabled, the "Phone off"
2.
message and the No Service icon (
display. To enable the phone functions, do the following:
• Press and hold the Quick/Lock key ( ) at the lower right side of
your phone's keypad. The Quick List menu appears in the display.
• Select the Wireless Manager option. The Wireless Manager
screen appears in the display. (For more information, refer to
"Wireless Manager" on page 110.)
• Select the Phone option. The Phone option setting switches from
Off to On.
• Press the Done soft key.
• Press .
The phone begins searching for a network signal.
3.
Once the phone finds a signal, the time, date, and day
4.
appear in the Home screen in the display.
5. You're now ready to place and receive calls.
Note: If you are outside of your carrier's coverage or roaming area, the "No
Service" message appears in the center of the phone's display. If you
cannot place or receive calls, try later when service is available, or at
another location.

Setting Up Your Phone (Basic)

This process details use of
the Getting Started feature
on your phone. You can use
Getting Started to
personalize your phone's
) appear in the
appearance and ringtone,
and to setup some
functions of your i225 for
immediate use.
Set date and time
Provided you have service from your Wireless Carrier's network,
this is done for you, automatically.
If the "No Service" message
is showing in the Home
screen, you can set the
time and date manually by
doing the following:
With the Home screen showing, press the Start soft key,
then select Getting Started (
sections describe uses of the Getting Started options.
). The following sub-
Getting Started 8