Ret Control - Quintel QS Series MultiServ Installation Manual

13

RET control

For direct RET control via a PC, it is recommended to use the RFS PA-USB/485 protocol adaptor, details can be found at
http://www.rfsworld.com/userfiles/pdf/pa_usb485_datasheet_revc.pdf, along with user instructions and software driver details at
http://www.rfsworld.com/WebSearchECat/datasheets/media/?q=images/Site_Optimization_Products/412818_PA-
USB485_Installation_Instructions.pdf.
It is required that any direct power connection to the RET device shall be a "limited power source" that does not exceed 100 Watts.
Please refer to relevant Network Operator Operating Procedures regarding connecting and programming RET devices with OEM
eNodeBs.
External AISG & RF Cable connections
For all external RF and AISG cable connections it is recommended that they are weather proofed in accordance with the cable
manufacturers and network operator's guidelines for weather proofing. Failure to do so, may lead to degradation in the product
performance or in worse case a product failure.
Important Note:
The installation, maintenance and removal of an antenna requires qualified personnel.
Antenna systems must be inspected at least once a year and after any severe weather by
qualified personnel to verify maintenance and condition of equipment.
Technical Support
Please contact technical support at the appropriate number or email contact listed below should you have any questions regarding
this installation guide.
About Quintel
Quintel is a leading innovator in the design, development, and delivery of network-efficient antenna solutions for wireless operators
worldwide. The company's products enable global wireless operators to independently deploy and optimize multiple air interfaces or
services on a single standard antenna platform. Quintel is the only antenna maker whose products can increase a wireless
network's capacity and provide additional services, without increasing the number or size of antennas. Quintel is headquartered in
Rochester, New York with additional offices throughout North America and Europe.
More information about Quintel is available at
World HQ
Tel (Americas): +1 (585) 420-8720
Fax (Americas): +1 (650) 472-9186
Email: info@quintelsolutions.com
For general company information, please email:
THIS DOCUMENT PROVIDES A GENERAL DESCRIPTION OF THE PRODUCT AND SHALL NOT FORM PART OF ANY CONTRACT.
© 2017 Quintel Technology Limited. All rights reserved. Quintel and the Quintel logo are registered trademarks Quintel Technology
Limited.
www.quintelsolutions.com
INS-AS-004024_E
QS Series Antenna Installation Guide
www.quintelsolutions.com.
Technical Support (World HQ)
Tel (Americas): +1 (602) 692-8600
support@quintelsolutions.com
info@quintelsolutions.com
MultiServ Multiband Antennas
Page 19