Do you have a question about the SAM 3X3 and is the answer not in the manual?
Questions and answers
Ron Klepal
June 11, 2025
How do we left the backboard up high enough to bolt it in
Backboard weight is over 150 pounds
1 comments:
Mr. Anderson
August 18, 2025
To lift the Schelde Sports SAM 3X3 backboard high enough to bolt it in, use at least two people to safely raise the board and hang it on the mast of the stand. Then mount it with 2 bolts (M10x25) and washers against the head plate of the mast.
Page 1
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS USAGE AND INSTALLATION INSTRUCTIONS SAM 3X3 1612070...
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS CONTENTS Safety Checklist Certification Packaging, weight and sizes Assembly Adjustment spring set Operation Operation manual APF...
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Safety • Store the transport bracket and the associated fasteners. • The backboard is made of tempered 1.
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS SAM 3x3 Checklist Glass backboard 180° dunk ring Front swivel wheel 2x2 Fixed wheel behind 2x2 Maintenance-free bearings Storage position max.
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Certification...
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Packaging, weight and sizes Package 1 Package 11 Rollable basketball stand SAM 3x3 Optional 24-second clock Weight: ±...
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS The backboard is made of tempered Assembly glass, be extremely careful. Mounting rollable basketball stand: Warning •...
Page 8
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Mounting braces vertical adjustment basketball backboard: Step 1: Mount the M12 adjusting yoke on plate in the...
Page 9
USAGE AND INSTALLATION INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Mounting backboard padding: Step 1: Fit the padding with the corresponding bolts, M6 nuts, spring washers and washers, the padding is equipped with 4 bolts / nuts on the bottom and 1 bolt / nut on both sides.
Page 10
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Mounting upper front padding Step 1: Replace the lower bolts M8x55 (where the lower wooden bar is attached) by bolts M8x60 and mount the plates with lips on the front padding.
Page 11
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Mounting the upper tree padding Step 1: Attach the padding with the Velcro upwards. Mounting padlocks on lock:...
Page 12
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Attaching the banner set Step 1: Attach the distance holders supplied with the bolts M6x20, spring washers and washers M6 on both sides of the front yoke and on both sides of the base frame.
Page 13
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Step 6: The side banners can be mounted in unfolded position. Consider the right and left version of the banner.
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS If necessary, adjustment of the spring set If the stand has been in use for some time,...
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Operation Step 1: Check that the floor is free of obstacles before rolling, in order to prevent damage to the wheels.
Page 16
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Step 6: Lift the handle on the back of the stand from the blocking position and bring the stand in the playing position.
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Optional: Operation of the manual APF Step 1: While the SAM stand is in storage position, check the position of the slide strip.
Page 18
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Step 5: Simultaneously push, with two people, both the left and right control rod downward. In...
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Maintenance Check that all bolts and nuts are properly tightened. Check the wheels. Damaged wheels can cause severe damage to a sports floor.
USAGE AND MOUNTING INSTRUCTIONS SAM 3x3 Nothing in this manual may be copied or used by third parties without the consent of SCHELDE SPORTS Technical specifications...
Need help?
Do you have a question about the SAM 3X3 and is the answer not in the manual?
Questions and answers
How do we left the backboard up high enough to bolt it in Backboard weight is over 150 pounds
To lift the Schelde Sports SAM 3X3 backboard high enough to bolt it in, use at least two people to safely raise the board and hang it on the mast of the stand. Then mount it with 2 bolts (M10x25) and washers against the head plate of the mast.
This answer is automatically generated