Table of Contents
Advertisement
Getting Started
Battery Installation, Charging, and Care
Your Sprint PCS Phone package includes a partially charged,
rechargeable battery so that you can use the phone
immediately after it is activated.
Installing the Battery
To attach the battery to your Sprint PCS Phone:
1. Hold the battery so that the metal contacts on the base
of the battery line up with the metal contacts on the
base of the phone.
2. Place the battery on the back of the phone with the top
of the battery about a quarter of an inch from the latch.
3. Gently slide the battery toward the top of the phone
until it snaps into place.
Dual-Slot Desktop Charger
The Dual-Slot Desktop Charger contains:
• Front compartment for charging the battery while
attached to the phone
• Rear compartment for charging the battery alone (not
attached to the phone)
• Red light to indicate that the battery is charging
(A yellow light indicates that the battery is operating at
a temperature that is too high or too low, or that the
battery is misaligned in the charger. Please check the
charger and battery.)
• Green light to indicate that the battery is fully charged
8
Advertisement
Table of Contents
