Verify The Cisco Nexus 1100 Series Setup; Instantiate The Cisco Nexus 1000V Series Vsm - Cisco Nexus 1110-S Deployment Manual

HA mode set to secondary. Rebooting now...
You have completed this procedure.

Verify the Cisco Nexus 1100 Series Setup

Run the following command on the Cisco Nexus 1100 Series VSA to validate the status of the Cisco Nexus 1100
Series VSA:
Nexus1110# show system redundancy status
Redundancy role
---------------
Redundancy mode
---------------
This supervisor (sup-1)
-----------------------
Other supervisor (sup-2)
------------------------

Instantiate the Cisco Nexus 1000V Series VSM

Verify that the Cisco Nexus 1000V Series VSM ISO is in the bootflash: directory. The Cisco Nexus 1100 Series
ships with an image that is the latest at the time of shipping. If a new VSM image has become available since then,
copy the image to the booflash memory using one of the supported file transfer mechanisms such as Secure Copy
(SCP), FTP, or Trivial FTP before proceeding.
Nexus1110# dir bootflash:
149497856
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
administrative:
operational:
administrative:
operational:
Redundancy state:
Supervisor state:
Internal state:
Redundancy state:
Supervisor state:
Internal state:
77824 Oct 26 17:51:50 2012
4096 Oct 26 17:36:52 2012
4096 Oct 26 17:35:16 2012
224 Oct 26 17:45:59 2012
4096 Oct 26 17:36:52 2012
16384 Oct 26 17:36:33 2012
553 Oct 26 18:19:49 2012
Oct 26 18:45:54 2012
primary
primary
HA
HA
Active
Active
Active with HA standby
Standby
HA standby
HA standby
accounting.log
core/
export-import/
initial.config.setup
log/
lost+found/
mts.log
nexus-1000v.4.2.1.SV2.1.1.iso
Page 32 of 39