Lcd Messages - Samsung SCH-100S Owner's Manual

The audio quality of the call is poor
Check the signal strength indicator (
number of bars indicate the signal strength from strong
( ) to weak ( ).
Try extending the antenna, moving the phone slightly or
moving closer to window if you are in a building.
No number is dialed when you recall a memory location
Check that the numbers have been stored correctly, by using
the memory scan feature (See page 33).
Re-store them in the memory, if necessary.
If the above guidelines do not enable you to solve
the problem, take a note of:
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or SAMSUNG
Authorized Service Center.
72
) on the display; the

LCD Messages

Cumulative call time is cleared
AIR TIME IS
CLEARED
All the phone numbers stored
ALL MEMORIES ARE
in memory are cleared.
CLEARED
There is no phone number
ALL MEMORIES ARE
stored in memory.
EMPTY
While the phone is restricted,
INT.CALL IS
you have tried to make an
RESTRICTED
international call beginning 00.
You have entered invalid or no
INVALID TIME
time.
All the phone numbers in redial
LAST CALLS ARE
memory are cleared.
CLEARED
The memory location you chose
LOCATION EMPTY
is empty.
The phone number is not
MAINTENANCE
registered in the base station.
REQUIRED
There is no empty location
MEM. (00-89) IS
under which you can store
FULL
phone numbers.
While the phone is restricted, you
MEMORY IS
have tried to make a call by
RESTRICTED
memory dial.
A phone number is already
MEMORY USED!
stored in the selected memory
STORE? YES
location.
73