Using The Rapid Desktop Charger - Samsung SCH-1000 User Manual

Personal communication services
Hide thumbs Also See for SCH-1000:
Table of Contents

Advertisement

Using the rapid desktop charger.

You should use only the Samsung-approved rapid desktop
charger and AC adapter with this Sprint PCS Phone. Using the
wrong one could cause damage.
1. Plug one end of the AC adapter into the charger and the
other end into a wall outlet.
2. Insert either the battery pack alone or the phone with the
battery pack installed into the charger slot.
A red light on the charger will let you know the battery is being
charged. A green light tells you when the battery is at least 90
percent charged.
If your battery's charge is completely run down, it will take
about two hours to fully recharge it (the extended battery takes
about three hours to fully recharge). Use the phone until the
battery icon flashes or the phone turns itself off. The rapid
desktop charger has a built-in battery conditioner to discharge
the battery (rear slot only).
We recommend that you condition your battery once a month to
extend its life. Insert the battery in the rear charger slot and then
press and hold the side button for one second. After releasing the
button, a flashing yellow light will indicate the battery is being
discharged.
16
Once the battery has been completely discharged, it will automati-
cally be charged (indicated by a red light).
If you leave your phone turned on while it's in the charger, your
battery will take longer to charge.
17

Advertisement

Table of Contents
loading

Table of Contents