Resetting Your Phone; Edit Lock Code - Samsung SCH-u540 Series User Manual

Enter the Lock Code then press
6.
digits of your telephone number.
Press
7.
Highlight Lock Setting and press
8.

Edit Lock Code

The default lock code is the last four digits of your phone number. Edit Code allows
you to change this code to a lock code of your preference.
From the main screen, press
1.
highlight
Press
2.
Press
3.
lock code is the last four digits of your telephone number.
Enter the Lock Code. Several security menus appear in the display.
4.
Press
5.
• Phone Only: Allows you to edit the lock code for only the handset.
• Calls & Services: Allows you to edit the lock code for all Calls & Services.
Highlight an option and press
6.
At the "ENTER NEW CODE" prompt, enter the new lock code and press
7.
.
You're prompted to confirm the new lock code.
8.
At the "CONFIRM LOCK CODE" prompt, re-enter lock code and press
9.
"PHONE ONLY CODE SET" or "CALLS &SERVICE COSE SET" message
10.
appears in the display confirming that your lock code was changed.
Note: Your phone does not allow you to view the lock code for obvious security reasons. If you change the
lock code, be sure to write down or memorize the new code.

Resetting Your Phone

Reset Settings returns all setup options to their factory default.
From the main screen, press
1.
highlight
Press
2.
Press
3.
Press
4.
wish to restore default settings (except for the Contacts).
Location Setting.
Settings & Tools.
Phone Settings.
Security. You're prompted to enter the lock code. The default
Edit Codes. The following options display:
Settings & Tools.
Phone Settings.
Security, and enter the lock code.
Reset Settings. A prompt appears in the display asking if you
. The default lock code is the last four
.
MENU, use the right navigation key to
.
MENU, use the right navigation key to
Changing Your Settings
Phone Settings
.
88