Samsung SCH r400 User Manual page 74

Note: For more information about using the camera feature in your phone, see "Multimedia" on page 99.
Press the
3.
Create Pic Msg screen then appears in the display with the Send To: list
highlighted.
Enter the phone number or e-mail address of the recipient of the Picture
4.
message, then press the
Tip: Press the Add (right) soft key (
Recent Calls. These options allow you to find and add recipients to the Send To: list.
The Subject: field appears in the display. Enter a subject for the Picture
5.
message using the keypad. (See See "Entering Text" on page 45 for more
information.)
Press the Down navigation key until the Text: field is highlighted, then
6.
enter the message text using the keypad. (See See "Entering Text" on page
45 for more information.)
Your new picture appears in the Pic: field.
7.
If you wish to insert a sound into your Picture message, use the Down
8.
navigation key to highlight the Sound: field and do the following;
otherwise, proceed to step 10.
• Press the Sounds (left) soft key (
display showing the following options:
– Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length, if you record first before
attaching a picture. If a picture is attached before recording, the size of the voice memo is limited to
the amount of remaining memory.
– Audio files list — Select from the list of previously recorded voice memos and
preloaded audio files on your phone.
Use the Up/Down navigation keys to highlight an option, then press the
to select the option and insert a sound into your message.
Press
Press the Options (right) soft key (
9.
set message send options. The following options appear in the display:
• Preview — View the picture as the recipient will see it.
• Save As Draft — Save the message to your Draft folder.
• Priority Level — Choose High, Normal, or Low.
74
key to save the picture and begin delivery process. The
OK
key.
OK
) to display a pop-up menu containing: Contacts, Groups, and
to exit the pop-up menu without inserting a sound.
CLR
). The My Sounds screen appears in the
) to complete the message text and
key
OK