Table of Contents
Advertisement
4-4 To check the time information
Under the normal measurement condition ( it do not execute
the Datalogger function ).
1) Press " Time Button " ( 3-7, Fig. 1 ) once , the lower
LCD display will present the time information of
Hour/Minute/Second ( h.m.s ) in the lower Display.
2) Press " Time Button " ( 3-7, Fig. 1 ) once again , the
lower LCD display will present the time information of
Year/Month/Date ( yy.mm.dd ) in the lower Display.
3) Press " Time Button " ( 3-7, Fig. 1 ) once again ,
the LCD will return to normal screen.
4-5 To check the channel information
The meter can set max. 9 channels data input with default.
The channel No. ( 1 to 9 ) is depend your meter's character,
For example :
Humidity/Temp. meter
It build two channels, channel 1 is Humidity value,
channel 2 is Temperature Value.
4 channel Thermometer
It build 4 channels, channel 1 is Temp. 1 value,
channel 2 is Temp. 2 value, channel 3 is Temp. 3 value,
channel 4 is Temp. 4 value.
Digital multimeter
It build one channel only, channel value is ACV, DCV,
ACA. DCA, or resistance.....
The meter only can show the two channel's data value.
Upper Display present the channel 1 value, the lower
Display present the channel 2 value.
10
Advertisement
Table of Contents
