Advertisement
Installation Instructions for Mincey Marble Manufacturing's
Please read the following before attempting to install your cast marble
These instructions have been written for Mincey Marble's SS-02 cast marble
corner mount shampoo shelf. If you have a different product than shown, please
call us for instructions for the product you have purchased.
In preparation, before installing this shampoo shelf, you will need to have completed the
installation of the panel system and sealed the seams of the shower behind where the
shelf is to be installed with 100% silicone.
Corner Mount Shampoo Shelf
Product number: SS-02
corner mount shampoo shelf
Mincey Marble Mfg., Inc.
4321 Browns Bridge Road
Gainesville, GA 30504
Ph: 800.533.1806
Fx: 770.531.0935
www.minceymarble.com
SS-02
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mincey Marble Manufacturing SS-02
Summary of Contents for Mincey Marble Manufacturing SS-02
- Page 1 Please read the following before attempting to install your cast marble corner mount shampoo shelf These instructions have been written for Mincey Marble’s SS-02 cast marble corner mount shampoo shelf. If you have a different product than shown, please call us for instructions for the product you have purchased.
- Page 2 Materials/Tools required: 1. Torpedo level 2. Pencil 3. Silicone (100%) and caulk gun 4. Hot melt glue and hot melt glue gun 5. Clean, dry rags Acetone* Two types of adhesive are needed to install the shampoo shelf because they serve different purposes.
- Page 3 Installing the shampoo shelf: 1. First you will need to determine the location of the shampoo shelf. Measure 48” up on the shower panels and make a mark with your pencil. This will be the height to the top of the shampoo shelf. 2.
- Page 4 Mincey Marble Manufacturing recommends using a high temperature hot melt glue stick when attaching your cast marble shampoo shelf to our panel systems. The company we purchase our glue sticks from is AIM Supply and the part number is BO 6390-15. This is a ½”...
Need help?
Do you have a question about the SS-02 and is the answer not in the manual?
Questions and answers