Advertisement
CAUTIONS
• Handle with care. Do not drop the camera.
• Do not expose the camera to direct sunlight or place it near a heat source.
• Be sure to use the camera in operating temperature range and less than 90% humidity.
• Do not install the camera in an excessively dusty or humid location.
• Do not expose the camera to rain or water.
• Do not install the camera in a location which is subject to excessive vibration or shock.
• Do not install the camera near equipments that generate a strong magnetic field and
radio frequencies.
• Do not disassemble the camera.
• Do not allow anything to get inside the camera.
• When the malfunction is observed, stop using the camera immediately.
Turn the power off and call your local dealer.
SPECIFICATIONS
Common
Power
Image Sensor
Scanning System
Min. Illumination
S/N Ratio
Video Output
Sync. System
AGC/AWB
Operating Humidity
Lens
Operating Temperature
Dimension(mm)
Weight
Individual
Model
VDC-272(PAL)
Resolution
380 TV Lines
Pixel
512(H) 492(V) NTSC
512(H) 582(V) PAL
* Specifications and design are subject to change without notice for improvement.
DC 12V 200mA MAX
1/3" COLOR CCD
2:1 Interlace
0.1 Lux at F:1.4
46dB
Composite 1.0Vp-p NTSC or PAL
Internal System
Automatic
–90%
Optional
–20˚C~ 50˚C
55(H) 55(W) 85(D)
220g
VDC-272(NTSC)
VDC-412(PAL)
VDC-412(NTSC)
480 TV Lines
768(H) 494(V) NTSC
768(H) 582(V) PAL
PART NAMES / DESCRIPTIONS
Front View
1. CCD Sensor: 1/3" Interline Transfer Color CCD
2. Camera Mounting Screw Hole
3. Video Output Connector
4. Power Indicator Lamp
5. Power Input Terminal
6. Auto Iris Lens Connector
7. ELC/Iris Switch (Electronic Level Control)
8. BLC On/Off Switch (Back Light Compensation)
Side View
Rear View
Bottom View
Advertisement
