Table of Contents
Advertisement
Setting Picture Mode
To set the picture mode:
1.
From camera mode, press Options (
2.
Select Settings (
3.
Highlight View Mode and press
4.
Press the navigation key up or down to highlight
Wide Screen or Full Screen and press
Setting the Flash
To activate the flash:
1.
From camera mode, press Options (
2.
Select Flash (
3.
Select one of the following options and press
Setting the Self-Timer
To activate the Self-Timer:
1.
From camera mode, press Options (
2.
Select Self-Timer (
3.
Press the navigation key up or down to select the
desired length of delay (Off, 5 Seconds, 10 Seconds) and
press
4.
Select Capture (
timer.
170
Section 2J: Using the Built-in Camera and Camcorder
Off to deactivate the flash.
On This Shot to activate the flash for one shot.
Always On to activate the flash for all pictures.
.
).
).
).
) when you are ready to start the
).
.
.
).
).
.
Advertisement
Table of Contents
