Printing Pictures Using Pictbridge - Samsung M520 Owner's Manual

Printing Pictures Using PictBridge

PictBridge is an industry standard established by the Camera & Imaging
Products Association (CIPA) that enables a range of digital photo solutions,
including direct photo printing from a digital camera to a printer without the
need for a computer.
Printing From Your Phone
Your phone's built-in camera allows you to print images directly to a printer
using the PictBridge technology. A USB cable must be connected between
the two devices before any printing can occur.
To use PictBridge to print pictures from your phone:
1.
Insert one end of the USB accessory cable into the USB slot on the
printer. (The printer must support PictBridge technology.)
2.
Select Menu > Pictures > PictBridge.
3.
Insert the other end of the USB accessory cable into your phone.
4.
Read the Connect Printer message and select
Next (
Select the folder location of the image.
5.
Highlight the desired image and select Next (
multiple images, press
image selected.)
6.
Highlight Copies and press the navigation key left or right to select
the desired number of copies to print.
7.
Press the navigation key down to select Type. Press the navigation
key left or right to select one of the following:
Standard: prints the standard image.
Index: prints the index information.
Note: These options may vary and are dependent on the printer's capabilities.
). The Select Folder pop-up appears in the display.
to place a check mark next to each
Section 2I: Using the Built-in Camera
). (To select
165