Samsung Instinct SPH-M800 User Manual page 116

—Use the Bluetooth capabilities of your old
Bluetooth
phone to transfer all of your contacts to the device.
Transfer Contacts with Bluetooth
The process of transferring data via Bluetooth is also
known as "beaming" and might be referred to that way
within other literature.
To set up your old phone and the Instinct to transfer
contacts:
1.
Turn on your old phone and then activate the
Instinct.
2.
Activate Bluetooth functionality on your old phone
and set visibility to
3.
Activate Bluetooth on your Instinct by pressing
and then touching
.
Bluetooth
4.
Touch and drag the Bluetooth slider to the
position. (The page then refreshes to reveal new
functionality and options.)
5.
Touch and set your Bluetooth visibility to
Visibility
.
Always Visible
104 Section 2J. Transferring Content to Your Device
.
Always Visible
)
Main ( > Settings >
To pair the two devices and send contacts to your Instinct:
1. On your Instinct, press
> Settings > Bluetooth > Trusted Devices.
2.
Touch
the old device.
3.
Select the previous phone by touching its name.
4.
Enter PIN of '0000' and touch
5.
On your old device, go to the Bluetooth function
that allows you to send all of your contacts to the
trusted device. (Consult your
device for instructions.)
6.
Select all of your contacts to send them all.
7.
Send the contacts.
8.
On the Instinct, touch
contact information.
On
To confirm that contacts have been transferred:
1. Press
transferred contacts.
2.
Once you have confirmed that the contacts are
transferred, turn off your old device.
and touch
in the upper-left corner to search for
Done
User Guide
to accept the incoming
Yes
and touch (
Contacts
)
(
Main
.
for your
) to view the