Entering Symbols
Symbol mode enables you to enter symbols such as @ or % in a text message.
In standby mode, press the Message (right) soft key (
1.
(for Send Message) and
text message.
Enter the phone number of the recipient, then press the
2.
Press the Left soft key (
3.
options appears in the display:
• T9 Word
• Abc
• ABC
• 123
• Symbols
• Add T9 Word
Use the Up and Down navigation keys to highlight Symbols, then press the
4.
key. The first of three screens of symbols appears in the display.
Use the Prev (left) soft key (
5.
to page through the other symbols, if necessary.
Press the key that corresponds with the symbol that you wish to enter. For
6.
example, press
Note: You can also use the navigation keys to highlight the desired symbol and then press the
enter the selected symbol into your message.
Repeat steps 3 through 6 to insert as many symbols into your message as
7.
desired.
for Text Message to compose a new
). A pop-up menu containing the following
) and the Next (right) soft key (
for an exclamation point (!).
ghi
Entering Symbols
), then press
key.
)
key to
Entering Text
51