Auto Retry; Tty Mode - Samsung Hue SCH R500 User Manual

Auto Retry

Auto Retry automatically re-dials a number if the connection fails. Depending upon
your location, the number of times your phone automatically dials the number may
vary.
In standby mode, press the MENU key (
1.
Settings),
Retry sub-menu with the following options appears in the display:
• Off — Disables automatic redialing of numbers
• Every 10 Seconds — Phone automatically redials a number every 10 seconds
• Every 30 Seconds — Phone automatically redials a number every 30 seconds
• Every 60 Seconds — Phone automatically redials a number every 60 seconds
Use the navigation keys to highlight the desired setting, then press the
2.
key.

TTY Mode

Your phone is fully TTY compatible. TTY equipment is connected to your phone
through the headset connector on the left side of the phone. TTY must be enabled
before you can use your phone with a TTY device.
In standby mode, press the MENU key (
1.
Settings),
prompted to confirm you want to change the current TTY Mode setting.
Note: Note: The "Enabling TTY may impair headset use and non-TTY accessory performance"
message pops up when you select TTY Mode.
Press the Yes (left) soft key (
2.
press the No (right) soft key (
menu.
If you press the Yes (left) soft key (
3.
the display:
• TTY Full — Enables TTY mode and disables microphone and earpiece
• TTY + Talk (VCO) — Enables TTY mode and microphone
• TTY + Hear (HCO) — Enables TTY mode and earpiece
• TTY Off — Disables TTY mode
Use the navigation keys to highlight your selection and press the
4.
to save your selection.
Note: The TTY icon ( ) appears in the top of the display when the phone is in standby mode.
150
(for Call Settings), and
ghi
(for Call Settings), and
ghi
), then press
for Auto Retry. The Auto
def
), then press
for TTY Mode. You are
ghi
) to access the TTY Mode options or
) to return to the Call Settings sub-
), the following options appear in
(for
tuv
(for
tuv
key