Philips Norelco SW9700 Manual page 24

24
English
2
1
1
5 Place the new shaving heads in the shaving
head holder.
Note: Make sure the notches on both sides
of the shaving heads fit exactly onto the
projections in the shaving head holder.
6 Place the retaining ring on the shaving
head and turn it clockwise to reattach the
retaining ring. Repeat this process for the
other retaining rings.
- Each retaining ring has two recesses
that fit exactly around the projections of
the shaving head holder. Turn the ring
clockwise until you hear a click to indicate
that the ring is fixed.
Note: Hold the shaving head holder in your
hand when you reinsert the shaving heads
and reattach the retaining rings. Do not
place the shaving head holder on a surface,
as this may cause damage to the shaving
heads.
7 Attach the shaving head holder to the
bottom part of the shaving unit ('click').