TP-Link TD-W9970B Quick Installation Manual

Quick Installation Guide

300Mbps Wireless N USB VDSL/ADSL Modem Router
TD-W9970/TD-W9970B
*TD-W9970 is used for demonstration in this QIG.

Connecting the Hardware

If you don't need the phone service, just skip step 1 and
directly connect the modem router to the phone jack with a
phone cable, then follow steps 3 and 4 to complete the
hardware connection.
Phone Jack
1
Connect the DSL splitter
to the phone jack.
DSL Splitter
Modem Router
2
Connect the modem
router to the DSL splitter.
Connect to the phone (Optional)
R
W E
P O
/O FF
O N
S E T
R E
S L
V D 3
Connect the power adapter to the modem
router and push in to turn on the modem
router.
4
Verify that the hardware connection
is correct by checking these LEDs.
Power DSL
On On
Notes:
1) The DSL LED
2) If the Wi-Fi LED
on the rear panel for 2 seconds, then the LED should
turn stable in a few seconds.
Power Adapter
Wi-Fi
On
takes about 1 to 2 minutes to stabilize.
is off, please press the WiFi button