Table of Contents
Advertisement
Quick Links
Dimensions:
42"(L) x 27"(W) x 35.5"(H)
4 DC
METAL RETRO GLIDER (Red Coral)
MODEL: 71550
NEED ASSISTANCE ?
Call 4D CONCEPTS directly for parts or assembly assistance.
Individual stores do not stock parts
Call our Toll-free number 5 days a week except holidays:
Monday through Friday 8.00am to 5.00pm
Pacific Standard Time
1-888-310-4DCO or 1-888-310 4326
IMPORTANT: Before calling please have the model number
and the packing code number ready for our customer service representatives.
You will find the model number printed on the carton label and the packing
code printed in black ink on the side of the carton.
Model
71550
It is important that you retain the model number and the packing code
along with the original receipt of purchase for future reference.
Made in China
Packing code
page 1
Advertisement
Table of Contents
Related Manuals for 4D Concepts 71550
Summary of Contents for 4D Concepts 71550
- Page 1 METAL RETRO GLIDER (Red Coral) MODEL: 71550 NEED ASSISTANCE ? Call 4D CONCEPTS directly for parts or assembly assistance. Individual stores do not stock parts Call our Toll-free number 5 days a week except holidays: Monday through Friday 8.00am to 5.00pm...
- Page 2 71550 ASSEMBLY INSTRUCTION PARTS LIST: (A) Right Back Qty: 1 (B) Left Back Qty: 1 (C) Right Seat Qty: 1 (D) Left Seat Qty: 1 (E) Right Arm Qty: 1 (F) Left Arm Qty: 1 (G) Connecting Qty: 2 (H) Flat Metal...
- Page 3 ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR. Step 1 Step 2 Item Drawing Item Drawing Attach the two side frames on connecting tube (G) on both Place the flat metal bar (H) with hook in one end and connect sides with bolt (4) on the outside, washer (5) and nut (6) on two seat panels with bolt (1) and washer (5) and nut (6) on...
- Page 4 ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR. Step 3 Step 4 Item Drawing Turn the connected seat panel over and place the seat frame Attach the seat bottom to the hooks of the support frame.
- Page 5 ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR. Step 5 Step 6 Item Drawing Item Drawing Attach the seat bottom on arms with bolt (1) and washer (5). Place the flat metal bar (I) in one end and connect two back Assembles as shown.
- Page 6 ATTENTION : DO NOT TIGHTEN ALL OF THE NUTS UNTIL THE FINAL STEP IS COMPLETED. IMPORTANT TO FULLY TIGHTEN BEFORE SITTING ON CHAIR. Step 7 Step 8 Item Drawing Item Drawing Plug the seat back’s center bar (I) into the hole of center bar Carefully line up the holes in arm cover (J) with holes on (H) on seat bottom.
Need help?
Do you have a question about the 71550 and is the answer not in the manual?
Questions and answers