Page 1
Environmental Equipment, Inc. IMR IX176 Portable Gas Detector User Manual Read this manual carefully before using this device. (727) 328-2818 / (800) RING-IMR • Fax: (727) 328-2826 www.imrusa.com • info@imrusa.com Ver. 1.0A4...
2. Do not modify, repair, or replace parts in the device without contacting IMR, we assume no liability for any harm caused due to improperly modified equipment.
RIEF NTRODUCTION The IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines, keeps workers safe and prevents damage to facilities. The detector uses high quality sensors. The shell is special high strength material with anti-slip rubber.
IX176 Environmental Equipment, Inc. IMR IX176 User Manual 3. S TRUCTURE AND UNCTIONS Note: Data upload function is only available only if requested at time of purchase. 3.1. A PPEARANCE 3.3. B UTTON FUNCTIONS 1. Alarm LED Button Description 2. Display ...
IX176 Environmental Equipment, Inc. IMR IX176 User Manual Note: If the self-test fails the display will 4. O PERATING INSTRUCTION show relevant information. For details refer to the table in section 4.4. The countdown occurs 4.1. P OWER N THE ETECTOR when there are no faults.
Page 7
IX176 Environmental Equipment, Inc. IMR IX176 User Manual Press to change menu items. The following table outlines each item: Display Description Press to adjust the time Press to turn on or turn off the key press sound Press to turn on of turn...
In this state the device will try to automatically correct it. If successful then after start-up it will open the time menu set up. If saving a new time fails the device will power off. Please contact IMR for repair. Memory error: When detecting the device will try to automatically correct it.
TATUS 4.7. B Pressing together will display the In order to make sure the IX176 is working Temperature, Time, STEL & TWA levels①, correctly it is suggested to do a “bump test” maximum level and minimum level②. before every use.
IX176 Environmental Equipment, Inc. IMR IX176 User Manual is damaged. Move to another location and test 5. C ALIBRATION AND LARMS again. If the problem persists replace the This section covers recalibrating the detector sensor. and adjusting alarm levels. 5.3. C...
Sensor replacement should only be done by and then press to complete set up. IMR or an authorized repair center. In the event that neither of these options are possible contact IMR for support. Do not replace the sensor with unauthorized parts.
Do not discard the battery in the standard trash. Please follow all local regulatory and environment regulations pertaining to lithium battery disposal. For any usage or trouble shooting not covered in this manual contact IMR. Disassembly, modification and repair of the device should be carried out by authorized personnel only.
IMR unit to the customer. 3. The IMR warranty shall refer to absence of faults with respect to the state of the art nature of the sold unit in terms of material and finish. The warranty for all parts fitted during the twelve-month warranty period shall end with the unit warranty.
Internet: www.imrusa.com Email: info@imrusa.com sales@imrusa.com technical_department@imrusa.com IMR® is a registered Trademark of IMR® Environmental Equipment, Inc. 3632 Central Ave. St. Petersburg, FL 33711 Phone: 727-328-2818 / 800-RING-IMR www.imrusa.com Fax: 727-328-2826 info@imrusa.com THE PRIDE OF THE COMPANY – MADE IN THE USA...
Need help?
Do you have a question about the IX176 and is the answer not in the manual?
Questions and answers