Quikcapture - GoPro HERO User Manual

QUIKCAPTURE

QuikCapture lets you power up your HERO and start shooting by pressing a
single button. Because the camera is powered on only when it's capturing,
you also conserve battery power.
CAPTURING VIDEO WITH QUIKCAPTURE
1. With the camera powered off, press the Shutter button [
Your camera powers on, beeps several times and automatically
begins capturing video. The camera status lights blink while the camera
is recording.
2. To stop recording, press the Shutter button again.
The camera stops recording, beeps several times and automatically
powers off.
To capture time lapse video, see Capturing Video and Photos
20
].
(page 22).
QUIKCAPTURE
CAPTURING TIME LAPSE PHOTOS WITH QUIKCAPTURE
In addition to showing how a scene changes over time, time lapse photos
are also useful for capturing a series of photos to be sure you get the shot
you want.
1. With the camera powered off, press and hold the Shutter button [
until capture begins.
3 sec
Your camera powers on, beeps several times and automatically
begins capturing time lapse photos. The camera status lights blink once
for each photo captured.
2. To stop capturing, press the Shutter button again.
The camera stops recording, beeps several times and automatically
powers off to maximise battery life.
To capture other types of photos or time lapse content, see
and Photos (page 22).
TURNING QUIKCAPTURE OFF
QuikCapture is on by default, but you can turn it off, if needed.
1. From the main screen, swipe down.
2. Tap Preferences > QuikCapture.
3. Tap Off.
]
Capturing Video
21