Sharper Image 203805 User Manual

INTRODUCTION

Thank you for purchasing Sharper Image Heated Insoles. These high-tech shoe inserts are
designed for a long life of warmth and comfort. Please take a moment to read this guide carefully,
and store it for future reference.

PACKAGE CONTENTS

• 2 Heated Insoles (including rechargeable batteries)
• USB charging cable with AC adapter
• Instruction guide

PRODUCT FEATURES

• Built-in rechargeable 3.7V polymer batteries
• Automatically maintains consistent warm temperature 95°-104°F (35°-40°C)
• Operates 4 to 6 hours on a full charge (depending on environmental conditions)
• Absorbs shock, sweat and odors
• Trim-to-fit toe area

CHARGING INSTRUCTIONS

1. Switch both insoles to the OFF position.
2. Insert the charging cable.
3. Plug the charging cable into a USB port or an AC outlet (using the included adapter). The
LED light will show red, indicating that the batteries are charging. (Normal charging time:
approximately 3 hours.)
4. When the batteries are fully charged, the red LED light will turn off.
Important: When charging the batteries for the first time, charge them for an additional 3-4 hours
after the red LED has gone out.

OPERATING INSTRUCTIONS

1. Switch the insoles to the ON position.
2. The LED light will show blue, indicating that the insoles are warming up.
3. Carefully place insoles into your shoes or boots.
4. The temperature of the insoles will reach a consistent 95°-104°F (35°-40°C).
Note: You may trim the toe end for optimum fit. Please follow the lines on the insoles.
Heated Insoles: Item No. 203805