Replacing Light Bulbs - Honda JAZZ Owner's Manual

Replacing Light Bulbs

Headlight Bulbs
When replacing, use the following bulbs.
High/Low beam headlight: 60/55 W (H4/HB2, H4
■
High/Low Beam Headlight
Coupler
Rubber Weather Seal
Hold-Down Wire
* Not available on all models
* for halogen bulb type)
1. Remove the coupler.
2. Remove the rubber weather seal.
3. Remove the hold-down wire, then remove
the bulb.
4. Insert a new bulb.
1Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and does not
need to be adjusted. However, if you regularly carry
heavy items in the luggage area or tow a trailer, have
the aiming readjusted at a dealer or by a qualified
technician.
When replacing a halogen bulb, handle it by its base,
and protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Continued 493