Honda JAZZ Owner's Manual page 445

uuWhen DrivinguDeflation Warning System
*1 : Models with the keyless access system have an ENGINE START/STOP button instead of an ignition
switch.
* Not available on all models
444
You can calibrate the system from the
customized features on the multi-information
display.
1. Press the button until
(customize settings) appears on the display,
then press the SEL/RESET button.
2. Press the button until Deflation
Warning System appears on the display,
then press the SEL/RESET button.
u The display switches to the
customization setup screen, where you
can select Cancel or Initialise.
3. Press the button and select
Initialise, then press the SEL/RESET
button.
Completed screen appears, then the
u
display returns to the customization
menu screen.
4. Press the button until
appears on the display, then press the SEL/
RESET button.
• The display returns to the normal screen.
• The calibration process finishes
automatically.
1Deflation Warning System Calibration
•
Deflation Warning System cannot be calibrated if a
compact spare tyre
•
The calibration process requires approximately 30
minutes of cumulative driving at speeds between
40–100 km/h (25–62 mph).
•
During this period, if the ignition switch
on and the vehicle is not moved within 45 seconds,
you may notice the low tyre pressure indicator
comes on briefly. This is normal and indicates that
the calibration process is not yet complete.
If the snow chains are installed, remove them before
calibrating the deflation warning system.
If the low tyre pressure/deflation warning system
indicator comes on even when the properly inflated
specified regular tyres are installed, have the vehicle
checked by a dealer.
We recommend that the tyres be replaced with the
(Exit)
same brand, model, and size as the originals. Ask a
dealer for details.
* is installed.
*1 is turned