Table of Contents
Advertisement
Creating and sending an i-MMS message
1. When the To1 field is highlighted, press the
Centre key.
2. Enter a destination address or phone number
and press the Centre key.
For further details about entering text, see
page 34.
3. Press the Down key to highlight the Subject
field and press the Centre key.
4. Enter a mail subject and press the Centre key.
Note: In addition to 4 normal input modes, you
can use Pictographic mode in the Subject
and SMIL fields, which allows you to enter a
variety of pictograms to enhance your text.
Pictograms may not display properly on
phones that are not compatible with i-
mode.
5. Press the Down key to highlight the SMIL field
and press the Centre key.
Now you can compose SMIL slides for the i-MMS
message by using the following options:
• Add text: allows you to add a message text.
When entering the message text, you can use
the copy & paste feature by pressing the
Options soft key. For further details, see
page 99.
Note: You can enter a carriage return code by
entering a "
line will change at that point when the
recipient reads the message.
" from the Symbol list. The
i-mode
101
Advertisement
Table of Contents
