Table of Contents
Advertisement
Editing a melody
While composing a melody or after opening a saved
melody, you can edit it.
1. To change an entered note or rest, move the
selection point by pressing [Up] or [Down].
2. Change the position of the note or type of the note
or rest the same as you would when inserting it.
3. Press [ ] or [ ] to move a note to the next
semitone higher position or lower position.
You can access the following options by pressing
<Options>:
•
Range: select more than one note or rest. The
selected ones are indicated in yellow.
•
Copy: copy the note or rest.
•
Cut: cut the note or rest.
•
Paste: paste the note or rest.
•
Change: change the note or rest.
•
Delete: delete the note or rest.
•
Play: play back the current melody.
4. After editing, press [Right] until the selection point
moves to an input position.
5. Press <Options> and select Save to save the
changes to the melody, or Save as to save the
melody as a different name.
Using composer options
While composing a melody, press <Options> to
access the following options:
•
New: open a new composer screen.
•
Open: open the list of your own melodies.
•
Play: play back the current melody.
•
Save: save the melody.
•
Save as: save the melody as a different name.
•
Instrument: change the musical instrument to be
used for playing the melody.
•
Background melody: use the background
melody.
•
Add note: add notes in different chord.
•
Tempo: change the tempo for the melody.
•
Volume: adjust the volume level of the main and
background melodies separately.
43
Advertisement
Table of Contents
