Samsung GH68-05054A User Manual page 150

Bearer: select a bearer to be used for each type of
network address accessed; GPRS or Data. The
remaining options depend on the Bearer setting.
When the bearer is set to GPRS:
IP Address: enter the WAP gateway address
required to connect to the Internet.
User Name: enter the User ID required to connect
to the GPRS network.
Password: enter the password required to connect
to the GPRS network.
APN: enter the access point name used for the
address of the GPRS network gateway.
When the bearer is set to Data:
IP Address: enter the WAP gateway address
required to connect to the Internet.
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone
number.
Data Call Type: select a data call type; Analogue
or ISDN.
Notes:
• The WAP browser settings may vary, depending on
the service provider. Contact your service provider
for further details.
• Your settings on your O2 Play & Go mobile should
already be set up for you, if not call O2 member
service on using the 9 key or dial 08705678678.
Funbox
149