Homeworks HR-REP-SW Installation Instructions

Rf signal repeater

Download this manual

Installation Instructions

Please Read Before Installing

Overview

The HomeWorks RF Signal Repeater provides additional

coverage area for Radio Frequency (RF) signals sent

between HomeWorks RF Dimmers/Switches, and RF

Keypads. Each RF Signal Repeater covers approximately

2500 square feet (232m

) of living space.

Codes: Install in accordance with all local and national

electrical codes.

Environment: Ambient operating temperature:

0-40°C, 32-104°F, 0-90% humidity, non-condensing.

Indoor use only.

Cleaning: Clean with a soft damp cloth only. Do not use

any chemical or abrasive cleaners.

RF Device Placement: RF Signal Repeaters must be

located within 60 feet (18m) of an RF Processor or

another RF Signal Repeater.

Power: Use only the DC adapter provided by Lutron with

your unit (Lutron model # T120-9DC-3-WH).

Caution - Using a DC adapter not rated at the

following specifications could damage the con-

trol and possibly overheat the DC adapter.

• Input: AC 120/127V 50/60Hz

• Output: DC 9V/300mA Class 2

RF Signal Repeater

HR-REP-SW

120/127VAC, 50/60Hz (DC Adapter)

HR-REP-SW

Need help?

Do you have a question about the HR-REP-SW and is the answer not in the manual?

Page 1 HR-REP-SW Please Read Before Installing 120/127VAC, 50/60Hz (DC Adapter) Overview The HomeWorks RF Signal Repeater provides additional coverage area for Radio Frequency (RF) signals sent between HomeWorks RF Dimmers/Switches, and RF Keypads. Each RF Signal Repeater covers approximately 2500 square feet (232m ) of living space.
Page 2 DC Adapter Installation Optional Wall Mounting RF Signal Repeaters may be wall mounted using the Find a suitable location for the RF Signal supplied wall bracket. Repeater. Place the Repeater in a convenient and accessible location. Note: RF Signal Repeaters Attach wall bracket to wall using the Wrap excess DC Adapter cord supplied screws and wall anchors.
Page 3 • RF Dimmers cannot be controlled by the RF Dimmer system and RF Keypads do not function until they are addressed and programmed. RF Keypad See the HomeWorks Utility online help. P/N 292-153 P/N 292 153 30 Feet (9m) maximum RF Processor Home B: 2500 sq.
Page 4: Limited Warranty
Repeater appears not to be working. No power available to unit. • Faulty power supply. Replace power supply. Repeater not programmed. • Refer to the HomeWorks Utility online help for program- ming instructions. Orange Auxiliary LED is flashing. Repeater is out of system communication range.