1-888-687-3552 FAX: 406-549-2602 WARNING 1. DO NOT USE BEACH ACCESS CHAIR WITHOUT CHECKING TIRES FOR PROPER INFLATION PRESSURE. CHAIR MAY BE UNSTABLE OR UNSAFE IF TIRE PRESSURE IS TOO LOW OR TOO HIGH. 2. NEVER OPERATE THE BEACH ACCESS CHAIR IN WATER. THIS PRODUCT IS NOT A FLOTATION DEVICE.
ASSEMBLY INSTRUCTIONS: The Beach Access Chair comes fully assembled on a crate. All the user needs to do is to check the tire inflation, assemble the umbrella and install it on the chair. The instructions below explain how this is done.
Page 3
The tire pressure should be checked and adjusted if needed before the first use of the BEACH ACCESS CHAIR, and periodically afterwards to ensure that the chair is and remains safe and stable. To check the tire pressure, remove the tire valve cap from the tire to be checked and check the tire pressure using a standard tire pressure gauge (not included).
Page 4
PHOTO 4. Adjust the umbrella to the desired height and lock it in place using the locking handle as shown in PHOTO 5. Now the umbrella can be installed into the umbrella hole (back right corner of the BEACH ACCESS CHAIR) and opened. PHOTO 4: UMBRELLA ASSEMBLY...
Page 5
OPERATING INSTRUCTIONS: The BEACH ACCESS CHAIR operates in an assisted mode; one person rides in the chair while another pushes it from behind. ALWAYS USE THE SAFETY BELT WHEN RIDING IN THE BEACH ACCESS CHAIR. USING THE PARKING BRAKE: When the BEACH ACCESS CHAIR is stopped the parking brake should always be engaged.
Page 6
USING THE RETRACTABLE FOOTREST: The BEACH ACCESS CHAIR comes with a retractable footrest, which needs to be extended to be used. To extend the leg-rest, pull the footrest forwards until it is fully extended as shown in FIGURE 2. When not in use the footrest can be retracted again.
Need help?
Do you have a question about the Beach Access Chair and is the answer not in the manual?
Questions and answers