Table of Contents
Advertisement
Other Call Settings
Ignore with message
Create messages to use when rejecting incoming calls. (For more
information, refer to "Sending Calls to Voicemail" on page 36.)
From the Settings menu, touch Call settings
1.
Ignore with message.
Touch Create.
2.
Enter the message text, then touch Save.
3.
Note: To erase messages, press
View call timer
View your phone's call time counters.
From the Settings menu, touch Call settings
1.
View call timer. The Last call, Outgoing Calls,
Incoming Calls, All calls, Last Reset, and Lifetime Calls
timers appear.
To reset all timers except lifetime Calls, touch
2.
Reset.
Menu, then touch Delete.
Menu
Auto retry
When enabled, your phone will automatically re-attempt a call
when it encounters a network busy signal.
From the Settings menu, touch Call settings
enable or disable automatic call retry. When enabled, a
check mark appears in the check box.
DTMF tones
Set the length of DTMF (Dual Tone Multiple Frequency) tones that
your phone sends. DTMF tones are used as input by some
automated call systems.
From the Settings menu, touch Call settings
1.
Touch Normal or Long.
2.
TTY mode
When enabled, TTY Mode allows your phone to work with a TTY
device attached to the Headset Jack. Before using your phone
with a TTY device, you'll need to enable TTY Mode.
From the Settings menu, touch Call settings
1.
Touch TTY Off, TTY Full, TTY HCO (TTY + Hear), or
2.
TTY VCO (TTY + Talk).
Auto retry to
DTMF tones.
TTY mode.
Settings
109
Advertisement
Table of Contents
