Advertisement
Quick Links
Download this manual
See also:
Instruction Manual
TOUCH CONTROL CLIPPER
QUICK START GUIDE
LCD Display
Comb
Up/Down
Touch Buttons
Tri Speed
Touch Button
Battery Touch
Button
STEP 1
Out of the Box
1. Remove plastic pull tab
2. Press power button
to begin. Your screen should show
3. Press
the screen will show
ready to use.
1
Power Button
Lock/Motor On
Comb Selection
Switch
to activate the batteries
or
and the clipper is
STEP 2
Achieving Your Desired Length
Length comb guards
1. Select comb and set the selection switch
to A, B, or C to correspond with desired
setting.
2. Install comb: Line up comb rails with the
slot on each side of the clipper. Press
down until comb clicks into place.
Long Adjustable
22-42mm (#6.5-#13)
Short Adjustable
3-23mm (#1.0-#7)
Stubble fixed 1.5mm (#0)
Note: does not use switch or LCD
3. To adjust height, set lock switch to
4. Use
buttons to reach desired length
Rail
Slot
(example)
2
Advertisement
Related Manuals for Remington HC5960
Summary of Contents for Remington HC5960
- Page 1 TOUCH CONTROL CLIPPER QUICK START GUIDE STEP 2 Achieving Your Desired Length Length comb guards 1. Select comb and set the selection switch to A, B, or C to correspond with desired LCD Display setting. 2. Install comb: Line up comb rails with the Rail Comb Power Button...
- Page 2 TOUCH CONTROL CLIPPER Troubleshooting QUICK START GUIDE 1. Clipper will not turn on a. Slide lock switch from b. Ensure pull tab is removed c. Charge for 12 to 18 hours Select Tri Speed Levels Tri Speed Levels 1. Set lock switch to High 2.