Advertisement
SINGLE-DAY ALARM FUNCTION
EVERY TIME YOU SET THE WAKE-UP ALARM, IT WILL WORK ONLY ONCE (ONE TIME).
THIS MEANS THAT THE NEXT DAY, THE ALARM WILL BE RESET AND
WILL NOT AUTOMATICALLY WAKE UP AGAIN.
PREPARE FOR THE ALARM SETTINGS
- THIS SET IS EQUIPPED WITH 2 ALARM MODES: BUZZER AND RADIO.
BEFORE SETTING THE ALARM, MAKE SURE TO SET THE CLOCK (SEE "DIGITAL
CLOCK FUNCTION" IN THE PREVIOUS SECTION) .
A. "ALARM" TIME SETTING
1
. PRESS THE
KEY TO PUT THE SET INTO "STANDBY" MODE
2. PRESS AND HOLD
Set
KEY UNTIL THE DISPLAY WILL NOW SHOW:
00 00
HOUR (FLASHING)
3. PRESS
AND
KEY TO REACH THE HOUR OF THE DESIRED WAKE UP
Set
TIME THEN PRESS
KEY TO CONFIRM.
THE DISPLAY WILL NOW SHOW:
8 00
4. PRESS
AND
KEY TO REACH THE MINUTES OF THE DESIRED
Set
WAKE UP TIME, THEN PRESS THE
KEY TO CONFIRM.
5. ADJUST THE VOLUME LEVEL AS DESIRED (FROM LEVEL 03-30) BY PRESSING
OR
KEY. PRESS THE
Set
KEY TO CONFIRM.
B. "ALARM" MODE SETTING
NOW SELECT THE SOURCE THAT YOU WISH THE UNIT TO PLAY AT THE "WAKE UP"
TIME AS BELOW:
FOR RADIO :
PRESS THE
KEY TO SWITCH ON THE SET (DISPLAY BACKLIGHT WILL
BE "ON").
TUNE IN THE DESIRED STATION.
ONCE THE DESIRED SOURCE IS READY, PRESS THE
INTO STANDBY MODE AND THEN SHORT PRESS THE
TO SELECT THE SOURCE AS DESIRED.
*REMARK:
= BUZZER ALARM /
1. THE ALARM TIME IS NOW FULLY PROGRAMMED AND THE ALARM SYMBOL WILL
APPEAR TO INDICATE THAT THE ALARM FUNCTION IS "ACTIVE".
(DISPLAY SHOWS AS FOLLOWS)
FM
FM SYMBOL
12:00
E-5
2. THE SET WILL NOW AUTOMATICALLY SWITCH "ON" AT THE WAKE-UP TIME AS YOU
3. TO TURN OFF THE UNIT AFTER IT HAS AUTOMATICALLY SWITCHED ON,
4. TO ACTIVATE THE ALARM AGAIN, REPEAT THE PROCEDURE OF "ALARM TIME
SNOOZE FUNCTION
- W HENEVER THE ALARM C OMES O N, IT C AN B E TEMPORARILY S USPENDED
F OR A S HORT P ERIO D O F 9 M IN UTES, B Y P RESSIN G THE " SNOOZE/ D IM MER" K EY
O NCE.
- THE ALARM W IL L THEN AUTOMATIC ALLY C OME O N AGAIN AFTER THE 9 M IN UTES
" SNOOZE" P ERIO D H AS E NDED.
- THE P ROCEDURE C AN B E R EPEATED F OR APPROXIM ATELY 6 0 M IN UTES F ROM
O RIG IN AL ALARM WAKE-UP TIM E.
AUTOMATIC POWER OFF SLEEP FUNCTION
- THIS SET HAS A SPECIAL SLEEP TIMER FUNCTION WHICH CAN AUTOMATICALLY
SWITCH OFF THE UNIT. THIS IS USEFUL FOR SLEEPING TO MUSIC AT NIGHT.
- AT ANY TIME WHILE THE UNIT IS OPERATING, PRESS THE SLEEP KEY,
THE "SL" SYMBOL LIGHT ON, THEN PRESS THE SLEEP KEY REPEATEDLY
MINUTES
TO CHOOSE THE AUTOMATIC POWER OFF TIME.
(FLASHING)
MINS
(*OFF MEANS SLEEP TIMER IS DEACTIVATED)
BLUETOOTH® WIRELESS PLAYBACK
THE UNIT CAN WIRELESSLY STREAM AUDIO FROM ANY BLUETOOTH® DEVICE
WITHIN 30 FEET.
SIMPLY PAIR THE DEVICE AND ENJOY WIRELESS PLAYBACK AND CONTROL FROM
YOUR BLUETOOTH® DEVICE.
PREPARE THE UNIT:
- PRESS THE
- PRESS THE SOURCE KEY UNTIL BT SYMBOL APPEARS.
- THE LED INDICATOR WILL FLASH SLOWLY TO INDICATE THE UNIT IS ON.
- PRESS AND HOLD "PAIR" KEY UNTIL THE LED INDICATOR FLASHING FAST AND
WAITING FOR PARING.
*NOTE ONLY ONE DEVICE CAN BE PAIRED AT ANY GIVEN TIME.
KEY TO PUT THE SET
PREPARE YOUR PHONE OR OTHER BLUETOOTH
Set
KEY REPEATEDLY
- TURN ON THE BLUETOOTH® FUNCTION, THIS IS USUALLY FOUND UNDER GENERAL
SETTINGS OR OPTIONS.
*PLEASE REFER TO YOUR DEVICE'S MANUAL FOR FURTHER BLUETOOTH® DETAILS.
FM
= RADIO
MAKE THE CONNECTION:
- GO TO YOUR DEVICE'S BLUETOOTH® SETTINGS
- ADD OR SEARCH FOR DEVICES
- IF ASKED FOR A PASS CODE, ENTER "0000"
CURRENT TIME
- THE LED INDICATOR WILL KEEP REMAIN LIT WHEN PAIRED.
*THIS IS A ONE-TIME EVENT PER DEVICE. TO PAIR YOUR UNIT TO ANY DEVICE,
REPEAT THE ABOVE PREPARATION AND CONNECTION STEPS.
AL
ALARM SYMBOL
HAVE CHOSEN, AS LONG AS THE ALARM FUNCTION IS "ACTIVE".
SIMPLY PRESS THE
KEY ONCE. THIS WILL SWITCH OFF THE SET,
ALSO THE ALARM SETTINGS WILL CLEAR.
SETTING" AS DESCRIBED.
90
80
70
60
50
40
MINS
MINS
MINS
MINS
MINS
KEY TO TURN THE UNIT ON.
®
E-6
30
20
10
OFF*
MINS
MINS
MINS
DEVICE:
Advertisement
