Advertisement
FRONT VIEW:
1
TOP VIEW:
2
3
BACK VIEW:
18
19
20
LOCATION OF CONTROLS
1. SPEAKER
2. LED DISPLAY
10.
3. BACK-UP BATTERY
11.
COMPART MENT (BOTTOM OF UNIT)
12. PLAY/ PAUSE / PAIR KEY
4. USB-1 SOCKET
13. VOLUME
(DC CHARGER: 5V/2000mA)
14. POWER ON/ OFF KEY
5. USB-2 SOCKET
15. ALARM SET KEY
(DC CHARGER: 5V/1000mA)
16. SLEEP KEY
6. SOURCE KEY
17. SNOOZE/ DIMMER KEY
7. FM MEMORY KEY
18. AUX INPUT SOCKET
8. CLOCK SET/ FM MODE KEY
19. DC JACK (DC 5V
9. VOLUME
KEY
20. FM ANTENNA WIRE
E-3
POWER SUPPLY
AC OPERATION (EXTERNAL AC-DC POWER ADAPTOR)
- THIS SET IS EQUIPPED WITH A "DC-JACK" CAPABLE OF ACCEPTING
AC-ADAPTORS WITH A RATING OF DC = 5V, 3A, AND WITH A PLUG
WITH THE FOLLOWING POLARITIES AS SHOWN (CENTER POSITIVE) :
- PLEASE USE ONLY THE SUPPLIED AC-ADAPTOR TO OPERATE THE UNIT.
USE OF OTHER ADAPTORS MAY DAMAGE THE UNIT OR CAUSE IT TO MALFUNCTION.
- PLUG THE TAIL END OF THE AC-ADAPTOR INTO THE DC-JACK (SOCKET)
ON THE REAR OF THE UNIT.
- INSERT THE PLUG OF THE AC-ADAPTOR INTO A WALL OUTLET WITH AC-POWER.
4
5
- PRESS THE "ON/ OFF" KEY TO SWITCH ON THE UNIT.
- THIS UNIT IS DESIGNED TO OPERATE WITHOUT EVER BEING TOTALLY POWERED "OFF". IT
WILL EITHER BE "ON" OR IN "STANDBY MODE".
- IN STANDBY MODE, THE BACK-LIGHT OF THE DIGITAL DISPLAY WILL BE DIMMED
BUT THE DISPLAY WILL SHOW THE CURRENT TIME (CLOCK FUNCTION).
- ANYTIME DURING STANDBY MODE, YOU CAN SWITCH "ON" THE UNIT BY PRESSING
THE "ON/ OFF" KEY.
- SAVE ENERGY BY SWITCHING THE SYSTEM TO "STANDBY" MODE WHEN NOT IN USE.
UP BATTERIES
9
6
7
8
- OPEN THE BATTERY DOOR AT THE BOTTOM OF UNIT.
10 11 12 13
- INSERT 2 PCS "AAA-CELL" (UM-4/LR03 TYPE) BATTERIES IN THE BATTERY
14 15 16
17
COMPARTMENT. THESE 2 BATTERIES ARE FOR BACKUP OF THE "CLOCK"
DURING BRIEF POWER OUTAGES.
D IMMER FUNCTION
THIS SET HAS A DIMMER FUNCTION TO ADJUST THE BRIGHTNESS LEVEL
OF THE DISPLAY BACKLIGHT. SIMPLY ADJUST IT AS DESIRED BY PRESSING
THE "SNOOZE/ DIMMER" KEY REPEATEDLY (HI-BRIGHTNESS / LOW-BRIGHTNESS / OFF)
THE DISPLAY BACKLIGHT WILL ALWAYS RETURN TO HI-BRIGHTNESS AS THE DEFAULT,
AFTER THE UNIT BEEN RESET.
DIGITAL CLOCK FUNCTION
-
HOW TO SET CORRECT TIME:
SWITCH UNIT TO "STAND- BY" MODE
1.
PRES S & HOLD
KEY
2.
12H
KEY
PRES S
KEY
3.
24-HOUR CLOCK DISPLAY SYST EM & PRES S
SELECTI ON.
PRES S
4.
THE CORREC T HOUR IN THE DISPLAY & PRES S
PRES S
5.
THE CORREC T MINUTE IN THE DISPLAY & PRES S
)
- - -
6.
CORREC T TIME IS NOW SET & WILL BE SHOWN IN THE DISPLAY.
ONE TOUCH DAYLIGHT SAVINGS TIME SWITCH
IN STANDBY MODE PRESS FM MEMORY KEY FOR 6 SECONDS, THE CURRENT TIME
WILL +1HOUR. PRESS AND HOLD FOR 6 SECOND AGAIN FOR -1 HOUR.
Set
KEY FOR 3 SECOND S DISPLAY SHOWS
HOUR OR
24H
HOUR (FLASHING)
OR
KEY TO SELECT 12-HOUR OR
Set
KEY T O CONFI RM YOUR
OR
KEY
REPE ATEDLY TO SET
Set
OR
KEY
REPE ATEDLY TO SET
Set
E-4
BACK
KEY
TO CONFI RM.
KEY
TO CONFI RM
Advertisement
