Advertisement
Quick Links
Avigilon Blue Connect Device Installation Guide
1
Unpack the Box
• Read all the instructions before you start.
• Record the serial number from the underside of the device.
Connect
2
Cameras
Plug the camera cables
into the PoE ports.
3
Plug into
Power Outlet
Plug in Ethernet
Cable
Connect the corporate
network port to the Internet.
Plug in Power
Adapter
Attach the power supply using
the supplied screwdriver.
For the complete user manual:
connect.blue.avigilon.com/support
x 2
x 4
x 4
x 4
1
Advertisement
Related Manuals for Avigilon Blue Connect
Summary of Contents for Avigilon Blue Connect
- Page 1 Avigilon Blue Connect Device Installation Guide Unpack the Box • Read all the instructions before you start. • Record the serial number from the underside of the device. Connect Plug in Ethernet Plug in Power Cameras Cable Adapter Plug the camera cables...
- Page 2 If the device is connected to your network but cannot be located in Explorer or Finder, use ARP (MAC address found on unit label), or check your Router/DHCP Server to find the device IP address, try the device hostname VMA-BLU-*-<serial number> from your browser, or contact Avigilon Support. Click Past Any Connection Messages Displayed by Your Browser You will see two warning messages that differ slightly depending on your browser.
- Page 3 Click Configure and start using the Avigilon Blue cloud platform NOTE: Subscribers must accept the Terms and Conditions of Service and the End User License Agreement for Avigilon Blue as a condition to using the Avigilon Blue cloud platform.
- Page 4 Optional Wall Mount © 2017-2018 Avigilon Corporation. All rights reserved. AVIGILON, the AVIGILON logo, AVIGILON BLUE, and the AVIGILON BLUE logo are trademarks of Avigilon Corporation. FIREFOX is a registered trademark of Mozilla Foundation. Windows is a trademark of Microsoft Corporation. Macintosh, Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S.