Screen Setup For Pc Mode - LG 50PC1DR Owner's Manual

U0512E-01 98/1/20 2:47 PM

Screen Setup for PC mode

Overview
When RGB connect to PC output and select the RGB-PC in Main
Input, this function is used.
When HDMI/DVI connect to PC output and select HDMI/DVI input,
this function is used.
In RGB-DTV mode, SIZE and PHASE is not available.
Adjustment for screen Position, Size, Phase, Reset
Press the ADJUST
1
select P P osition, S S ize, or P P hase.
Press the ENTER
2
button to make appropriate adjustments.
■ The P P hase adjustment range is - - 16
■
The S S ize adjustment range is - - 30
3
Press the ENTER
Initializing ( Reset to original factory values )
To initialize the adjusted values.
Press the ADJUST
1
select R R eset.
Press the ENTER
2
select Y Y es.
3 Press the ENTER
Page 35
button and then use or
D E
button and then use
D / E
+16.
~
+30.
~
button.
button and then use or
D E
button and then use F or G
button.
Position
button to
Size
Phase
or F / G
Reset
Adjust Close
Position This function is to adjust picture
Size
Phase
button to Position
Size
Phase
button to
Reset
Previous
Adjust
FLASHBK
APM
CC
G
to left/right and up/down as you
prefer.
This function is to minimize any
vertical bars or stripes visible on
the screen background. And the
horizontal screen size will also
change.
This function allows you to
remove any horizontal noise and
clear or sharpen the image of char-
acters. In HDMI/DVI-PC mode,
PHASE is not available.
Initialize Settings
No
Yes
G
Move Select
35