Checking Or Changing Programmed Tracks; Searching For And Storing The Radio Stations - Samsung MAX-B450 Instruction Manual

MAX-B420/B450GB no rds-1~14 1
Checking or Changing Programmed
Tracks
You can check or change your selection of tracks at any time.
1
Press once if you have started listening to the selection.
2
Press Program.
Result: The following indications appear:
(CH = Check, 01=Program No, DI = Disc No, – – = Track No on the disc)
If you have already programmed 24 tracks, CH is displayed
instead of PR when you press Program.
3
Press Program again.
Result: The first track selected is displayed, together with the letter
CH(Change).
4
Press Program one or more times until the track to be changed is
displayed.
5
If necessary, press the corresponding Disc (1, 2, 3) button to change
discs.
6
Press / to select a different track.
7
Press Program to confirm your change.
8
Press CD ( ) to start listening to the selection.
Result: The first track selected is played.
2,3,4,7
8
2,3,4,7
6
5/16/02 11:11 PM
5
6
1
6
1
8
6
Page 13
Searching for and Storing the Radio
Stations
You can store up to:
15 FM stations or
5 MW stations
5 SW1 stations
5 SW2 stations
1
Switch the system on by pressing Standby/on.
2
Select the TUNER function by pressing TUNER .
3
Select the required frequency band by pressing TUNER (Band)
again on the front panel or TUNER (Band) on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
SW1(Option)
SW2(Option)
4
To search for a Press Tuning Mode on the remote
station... control
Manually One or more times until MANUAL is displayed.
Preset One or more times until PRESET is displayed.
5
Select the station to be stored by:
Press the and
respectively
or
Pressing Tuning or
To scroll through the frequencies faster when searching manu-
ally, hold down the Tuning Down or Up buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the Volume knob on the front panel
or
Pressing the VOL. + or – buttons on the remote control
7
Select the FM stereo or mono mode by pressing Mono/ST. on the
remote control.
2,3
1
5
7
15 FM stations
15 AM stations
Frequency Modulation
Medium Wave
Short Wave
Short Wave
to increase or decrease the frequency
on the remote control
6
5
4
5
13
GB