Subscribe to Our Youtube Channel
Related Manuals for Artel FiberLink 5200-B3z
Summary of Contents for Artel FiberLink 5200-B3z
- Page 1 MANUAL FiberLink 5200 Series Two way audio, data, 10/100 Ethernet & contact closure over one or two fibers. Installation and Operations Manual WWW.ARTEL.COM...
-
Page 2: Table Of Contents
Contents FiberLink 5200 Series Contents Model Part Number Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 General Specifications . - Page 3 FIberLink 5200 Series Welcome Thank you for purchasing Artel Video Systems’ FiberLink 5200 Series . The 5200 Series is used to transmit two-way audio, 10/100 Ethernet, serial data, and contact closure over one or two fibers . The Fiberlink 5200 series is compatible with single mode or multimode fiber . The system delivers noise-free transmission that retains all of the signals’...
-
Page 4: Model Part Number Specification
Technical Specifications FiberLink 5200 Series Model Part Number Specification Unit Type Part Number Card Transceiver (1 Fiber, MM) 5200-B3z 5200-C3z Transceiver (1 Fiber, SM) 5200-B7z 5200-C7z Transceiver (1 Fiber, MM) 5201-B3z 5201-C3z Transceiver (1 Fiber, SM) 5201-B7z 5201-C7z NOTE: “z” = variable to indentify the optical connector installed in the unit . We offer LC and ST connectors . -
Page 5: Audio Specifications
Technical Specifications FIberLink 5200 Series Audio Specifications Number of Audio Channels 2, balanced or unbalanced, bi-directional Bits per sample/ Sampling Rate 24 bits, 78 kHz Audio Connector Removable terminal block Switches • Select input termination • Balanced or unbalanced input/output, selectable on a per-channel basis Frequency Response +0/-0 .5 dB, 20 Hz - 20 kHz... -
Page 6: Contact Closure Specifications
Technical Specifications FiberLink 5200 Series Contact Closure Specifications Contact Closure Input Dry contact or TTL level referenced to GND Contact Closure Output Isolated reed relay contacts; 115 Volts AC; 50/60 Hz @ 0 .2 A or 24 Volts DC @ 1 A Contact Closure Connectors Removeable terminal block Fiberlink 5200 Series Transmitter Specifications... -
Page 7: Fiberlink 5201 Series Receiver Specifications
Technical Specifications FIberLink 5200 Series Fiberlink 5201 Series Receiver Specifications Fiber Optic Input Specifications Connector LC or ST Wavelength 1100 - 1620 nm Minimum Input Sensitivity -19 dBm Maximum Input Power 0 dBm FiberLink 5200 Series User’s Manual Page 7... -
Page 8: Operating Loss Budget
*Distance specifications are approximate, based upon connecting a 5200 Transmitter to a 5201 Receiver, and are not guaranteed . Artel cannot estimate or guarantee operating loss budgets when the 5200 Series is used with other, non-Fiberlink devices . Operating loss budget must not be exceeded... -
Page 9: Installation Instructions (Cont.)
Installation Instructions FIberLink 5200 Series Installation Instructions (cont.) Note: when using the two-fiber version, you must connect transmitter “A” Optical 1 to receiver “B” Optical 1 and transmitter “A” Optical 2 to receiver “B” Optical 2. Connect the Universal Power Supply to the transmitter and receiver units . For box versions using DC power, please refer to figure 1 . -
Page 10: Audio Wiring - Inputs
FiberLink 5200 Series Audio Wiring (All Versions) Audio Wiring - Inputs Balanced Un-Balanced Channel 1 Input (-) Channel 1 Ground (-) Channel 1 Input (+) Channel 1 Signal (+) Ground (Shield) Shield Channel 2 Ground (-) Channel 2 Input (-) Channel 2 Signal (+) Channel 2 Input (+) Audio Wiring - Outputs... -
Page 11: Audio Input Switch Settings For Box Versions
FIberLink 5200 Series Data Switch Settings (Box Version) Audio Input Switch Settings For Box Versions Channel # Balanced Balanced Unbalanced (600 Ohms) (24k Ohms) (24k Ohms) Channel 1 controlled by Switches 3 & 4) 1 2 3 4 1 2 3 4 1 2 3 4 Channel 2 controlled by... -
Page 12: Ethernet Configurations For Box Versions
FiberLink 5200 Series Data Configuration (Box Version) Ethernet Configurations For Box Versions DATA CONFIG DATA CONFIG E 1 2 3 4 5 6 7 8 9 E 1 2 3 4 5 6 7 8 9 100 Base-T Ethernet 10 Base-T Ethernet Baud Rate Configuration For Box Versions DATA CONFIG DATA CONFIG... -
Page 13: Data Wiring For Box Versions
FIberLink 5200 Series Data Wiring (Box Version) RS-Data Configuration For Box Versions DATA CONFIG DATA CONFIG E 1 2 3 4 5 6 7 8 9 E 1 2 3 4 5 6 7 8 9 RS-232 RS-422/485 - 4 Wire DATA CONFIG E 1 2 3 4 5 6 7 8 9 RS-485 - 2 Wire... -
Page 14: Reference Photos - Card
Audio Configuration (Card Version) FiberLink 5200 Series Reference Photos - Card Images Coming Soon Audio Input Switch Settings For Card Version Channel # Balanced Balanced Unbalanced (600 Ohms) (24k Ohms) (24k Ohms) Channel 1 controlled by 1 2 3 4 1 2 3 4 1 2 3 4 Switches 1 &... -
Page 15: Audio Output Switch Settings For Card Version
Data Configuration Settings (Card Version) FIberLink 5200 Series Audio Output Switch Settings For Card Version Channel # Balanced Unbalanced Channel 1 controlled by Switch 1) Channel 2 controlled by Switch 2) Data Configuration For Card Version The Fiberlink 5200 Series card units have three switch blocks; one 10 position, one 4 posi- tion, and one 2 position . -
Page 16: Data Baud Rate Configuration For Card Versions
FiberLink 5200 Series Data Configuration (Card Version) Data Baud Rate Configuration For Card Versions DATA CONFIG DATA CONFIG 2400 4800 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 DATA CONFIG DATA CONFIG 9600... -
Page 17: Ethernet Configurations For Card Version
Data Configuration (Card Version) FIberLink 5200 Series Ethernet Configurations For Card Version DATA CONFIG DATA CONFIG 1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 10 Base-T Ethernet 100 Base-T Ethernet Data Wiring For Card Versions RS-232 Input... -
Page 18: Alarm Switch Settings & Options
Alarm Switches (Card Version Only) FiberLink 5200 Series Alarm Switch Settings & Options The Rack Card version of this product has an additional red indicator LED that illuminates when an alarm condition exists . The rack card unit also provides an output to drive a model 6020A Alarm Sensing Module which provides an audible tone and activates a set of contacts for external signaling purposes . -
Page 19: Indicator Leds
Indicator LEDs FIberLink 5200 Series Indicator LEDs The FiberLink 5200 Series has several indicator LEDs that are used to monitor the state of the unit . Card versions have an additional Alarm LED . LED Definitions Status Definition Power Indicates that correct power has been applied . Audio In Indicates no audio detected (electrical) Blink... -
Page 20: Operating Pointers
Operating Pointers | Troubleshooting FiberLink 5200 Series Operating Pointers Remember to check attenuation of the fiber optic cable . The system will only operate properly if these specifications fall within the range of the system’s loss budget . Note: If no electrical signals are applied to the Transceiver inputs, no optical power will be present on the Transceiver’s optical output . -
Page 21: Maintenance And Repairs
. They have been designed for long, reliable and trouble-free service and are not normally field repairable . Should difficulty be encountered, Artel Video Systems maintains a complete service facility to render accurate, timely and reliable service of all products . - Page 22 Warranty FiberLink 5200 Series FiberLink 6656 Visible Light Source The Fiberlink 6656 is a light-weight, hand-held tool used to quickly troubleshoot faults in the continuity of both single-mode and multimode fibers . High-intensity visible laser allows for visible fault location of breaks and microbends in both single-mode and multimode fibers FiberLink 6650 Optical Power Meter The Fiberlink 6650 Optical Power Meter is a high accuracy, high...
-
Page 23: Accessories And Related Products
Accessories and Related Products FIberLink 5200 Series FiberLink 5200 Series User’s Manual Page 23... - Page 24 • Designed and manufactured in the USA • Training and installation support available • 24x7x365 technical support available Artel Video Systems Corp. 5B Lyberty Way, Westford, MA 01886 USA T: 978-263-5775 All specifications subject to F: 978-263-9755 change without notice.
Need help?
Do you have a question about the FiberLink 5200-B3z and is the answer not in the manual?
Questions and answers