Table of Contents
Advertisement
Connecting the HRD-i
Connect one end of the supplied cable to the output connector beside the
~
symbol on the rear of the HRD-i. Connect the other end to the input on
the rear of the Trio below the @ symbol. To play video tracks stored on your
iPod connect a standard RCA plug cable between the output on the back of
the HRD-i beside the
0
symbol and the composite input of your television.
Typically the composite video input of a television is color coded yellow. Refer to the manual for your television for
information on this input and how to use it.
The HRD-i is supplied with seven docking adapters. These fit in the docking well of the HRD-i to support various iPod
models. The table below lists the iPod models and the docking adapters to use with them. The number of the docking
adapter is molded into the back of the part. Place the appropriate adapter in the docking well and plug your iPod into
the dock
Docking
~--:
AdaPler~
iPod nano - 3rd generation (4/ 8GB)
13
iPod nano - 2nd generation (2/4/ 8GB)
11
SG iPod with video (60GB / 80GB), iPod classic (160GB)
10
SG and U2 iPod (30 GB with video), iPod classic (80GB)
9
iPod photo (40/ 60GB), iPod with color display (60GB)
7
iPod nano (2/ 4GB)
8
iPod touch 8GB
&
16GB
14
iPod Model (Capacity)
Adapter Number
Playing Your iPod
To select the iPod source use the
MODE
control or the
IPOD
button of the remote control as described in the "Selecting a
Source" section earlier in this manual. Then use the iPod controls to select the track(s) you want to play.
~
C
)t-r,tr
-:-1))
:=I,J ..
11'i..·~'':'III-
E,(!r"ld
1_
0:-
l-jt
~ -:oJ
:rT
f='J'
;,:::.-
::.
.;:.::.
Front Panel Control iPod Operation
CD
Press the ~II button to start or pause playback.
m
Press the ~ control to skip to the next track. Press the I+l control
once to skip to the beginning of the current track. Press the I+l twice
to skip to the previous track
ill
Press and hold the ~ or I+l button to start fast forward or rewind.
o
Press the
./EJECT
button to stop disc play. Press and hold the button
to eject the disc.
Notes:
In addition to normal disc play you can select Shuffle Play, Repeat All
track and Repeat One track. See the "Audio Settings" section for more information.
The illustration shows a typical display when the Display Preference is set to Source. See the "Display Controls'
section of this manual. If the Display Preference is set to Time the day and time appear in the middle of the display. The
source, play/pause status, track number and total track, and the track elapsed time appear in the top bar.
9
Advertisement
Table of Contents
