Connecting Other Equipment; Connecting Headphones; Using Aux Inputs; About Clock Memory - Boston Acoustics Horizon TRio Manual

High performance tabletop cd music system
Table of Contents

Advertisement

Connecting Other Equipment
Connecting Headphones
Connect the headphone plug to the jack beside the
0
symbol. This turns off the Trio internal speakers. If your
headphones
have a 1/4-inch plug you will need an adapter.
Using Aux Inputs
Other audio equipment, such as a portable CD player, can be connected to the Trio through the Aux inputs. The Aux 1
input on the front panel has an ·lIB-inch jack. The Aux 2 input on the rear panel uses two RCA jacks. The right and left
channel jacks are color coded red and white respectively. Select the Aux 1 or Aux 2 input using the
MODE
control as
described in the "Selecting a Source" section of this manual.
About Clock Memory
When power to the Trio is interrupted a special power component called a "super-cap· will keep the clock functions
active for a period of 24-48 hours. If the Trio is without power for a longer period of time you may need to reset the clock
when power is restored.
Security Cable Connection
There is a security cable connection point on the rear of the Trio. This is the same as the connection point found on most
laptop computers. Connect a computer security cable between the Trio and a solid anchor point to help prevent theft of
your Trio.
Service Port
The Service port on the rear panel is for use only qualified
service technician.
Maintenance and Service
The Trio enclosure may be cleaned using a soft cloth to
remove fingerprints or to wipe off dust. All wiring connections
should be inspected and remade at least once a year.
In the event that your speakers
ever need service, contact your local Boston Acoustics dealer or visit
bostonacoustics.com/dealers for a list of dealers in your area.
13

Advertisement

Table of Contents
loading

Table of Contents