Mercedes-Benz 1985 380SE Owner's Manual page 81

Replacing bulbs:
Bulbs for turn signal, standing, side
marker and parking lamps
(21/5 W/32/3 cp):
Turn lamp holder with bulb to the left
and remove. Depress bulb, turn to
the left and take out.
Sealed-beam unit for high and low
beam (Sealed-beam/Halogen):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
6
securing screws ( ) and remove
front cover. Remove securing
8
screws ( ) from retaining frame and
take out sealed-beam unit. Pull off
connector.
380 SE, 500 SEL:
Bulb for fog lamp (H 3):
Loosen securing screw (5) and pull
housing out of bracket. Then loosen
6
securing screws ( ) and remove
front cover. Remove securing
10
screws ( ) and take out lamp
holder. Pull off plug connector (12).
Disengage retaining spring (13) and
take out bulb.
0/3£(v
t q f
Fog Lamp 500 SEC
The bulb for the fog lamp is acces­
sible through the wheel well for the
purpose of bulb replacement.
1 Vertical adjustment screw for the
fog lamp
2 Horizontal adjustment screw for
the fog lamp
Electrical System
4 Bulb for fog lamp (H 3):
Unsnap the bottom of protective
cap and remove towards the top.
Loosen clip (3) and remove
cover.
Unplug electric connector (5).
Unhook retaining spring and
remove bulb.