Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Trotec PCPS 10-1100
Summary of Contents for Trotec PCPS 10-1100
- Page 1 PCPS 10-1100 ORIGINAL INSTRUCTIONS COMPRESSOR...
-
Page 2: Table Of Contents
(e.g. material damage), but does not indicate hazards. Info Information marked with this symbol helps you to carry out your tasks quickly and safely. Follow the manual Information marked with this symbol indicates that the operating manual must be observed. compressor PCPS 10-1100... -
Page 3: Safety
• Do not let familiarity gained from frequent use of tools Damaged or entangled cords increase the risk of electric allow you to become complacent and ignore tool shock. safety principles. A careless action can cause severe injury within a fraction of a second. compressor PCPS 10-1100... - Page 4 Feed hosed designed for a lower operating pressure could burst leading to personal injury or property damage. You should only use fabric- or wire-reinforced feed hoses for compressors with a max. pressure above 7 bar. compressor PCPS 10-1100...
- Page 5 Warning of electrical voltage Please note that the pressure gauge is not calibrated. Before any work on the device, remove the mains plug We recommend using the power tool with original Trotec from the mains socket! accessories. Hold onto the mains plug while pulling the power cable out of the mains socket.
- Page 6 1. Switch the device off. 2. In an emergency, disconnect the device from the mains feed-in: Hold onto the mains plug while pulling the power cable out of the mains socket. 3. Do not reconnect a defective device to the mains. compressor PCPS 10-1100...
-
Page 7: Information About The Device
• 1 x Presta/Dunlop valve adapter • 1 x Ball needle • 1 x Nozzle adapter • 1 x Universal plastic adapter with 3 nozzle attachments • 1 x Universal adapter, small • 1 x Universal adapter, large • 1 x Blow-out adapter • 1 x Manual compressor PCPS 10-1100... -
Page 8: Transport And Storage
Warning workpiece being processed. Risk of suffocation! Do not leave the packaging lying around. Children may use it as a dangerous toy. • Dispose of the packaging material according to the national regulations. compressor PCPS 10-1100... - Page 9 ü The device is switched off. 1. Push the quick-release lever (22) at the hose (15) of the 1. Pull the trigger (14) of the compressed-air gun (12) to compressed-air gun and insert the desired valve release residual pressure from the system. adapter (6, 7, 8, 17). compressor PCPS 10-1100...
-
Page 10: Operation
• Only use intact, flawless valve adapters. • Do not use the device at temperatures below +5 °C, since the motor becomes sluggish and can be difficult or impossible to start up at these temperatures. compressor PCPS 10-1100... - Page 11 2. Make sure that the system is depressurized by pulling the trigger (14) of the compressed-air gun (12) after switch-off. 3. Hold onto the mains plug while pulling the power cable out of the mains socket. 3. Switch the device off by setting the on/off switch (2) to position 0. compressor PCPS 10-1100...
-
Page 12: Errors And Faults
Note company or by Trotec. Wait for at least 10 minutes after maintenance and Slight smoke or odour are emitted during first use: repair work. Only then switch the device back on. -
Page 13: Maintenance
• Dry the bits with a soft, lint-free cloth. specialist companies or by Trotec. • Particularly during cleaning and maintenance, make sure • Keep the ventilation openings free from dust deposits to that there is no residual pressure left in the system. -
Page 14: Declaration Of Conformity
Declaration of conformity In accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1, Section A Herewith, we – Trotec GmbH & Co. KG – declare that the machinery designated below was developed, constructed and produced in compliance with the requirements of the EC Machinery Directive in the version 2006/42/EC. - Page 16 Trotec GmbH & Co. KG Grebbener Str. 7 D-52525 Heinsberg +49 2452 962-400 +49 2452 962-200 info@trotec.com www.trotec.com...